Temperature and humidity sensing is needed in countless areas, such as the storage of production materials, finished products, and medical supplies. Likewise, these measurements can be used for deeper analysis of building insulation, airflow projection, air conditioning detection, room overheating detection, and so on. STICKER Clime will help you obtain the source data.
WIRELESS CONNECTIVITY
LONG BATTERY LIFESPAN
MINIATURE DIMENSIONS
Monitoring the temperature of the material storage and the temperature at the point of use of the material is very important for many production processes. The plastics industry is an example. Plastic injections sometimes contain porosity. This is often caused by moisture occurring in the input material. If the storage area is cooler than the injection molding site at certain times, then water can condense on the granulate after the material has been transported to the injection molding site, resulting in subsequent porosity in the manufactured products. Without long-term monitoring of temperature and humidity, it is very difficult to detect these relationships.
Medicine storage requires strict conditions and constant monitoring of the environment where the medicines are stored. If there is a significant change in temperature or humidity, this should be reported immediately. Storage areas are often very large, and therefore, many sensors are needed to cover the entire measurement area correctly.
Over the last twenty years, the average temperature on the ground has been rising very rapidly, and there are more extreme temperatures in both summer and winter. When the air conditioning in a hospital room that maintains consistent conditions for the patient fails, there is a high risk of complications for the patient. Sometimes, the air conditioning may not even fail. All it takes is someone forgetting to close a window. If the patient is immobile, then a temperature and humidity sensor in every hospital room is needed for early warning.
Low-power design
Reliable and long operation on standard AA batteries
Open-source firmware
Ability to create your applications or update the existing ones
Custom branding
Full OEM branding service, including custom color printing
Motion PIR detector
Simply detect movement in the environment with the integrated sensor
LoRaWAN connection
Create a private LoRaWAN network or use Public LoRaWAN networks
Industry logic
Scan up to two digital inputs for 24V industrial logic
Voltage measurements
Wirelessly measure up to 2 channels of voltage up to 30 V
Thermometer measurement range with integrated sensor
-20°C to +65°C
Hygrometer range
0 - 100%
Accuracy of the integrated thermometer
+- 0.2°C (0 to 65°C)
Hygrometer accuracy
+- 2% (10 to 90%)
STICKER is a quick solution to start collecting data. Thanks to its small size and low power consumption, you don't have to use power cables. You can easily collect data from different locations and applications. If you need help designing a solution for your application, please contact us.
